Consumables
For Precise Single Cell Isolation
Consumables for LMD
For contamination-free isolation of single cells or larger regions of interest (ROIs) using the LMD CellCut, specialised membrane slides with a thin membrane are required, onto which the tissue (e.g. FFPE samples) is mounted. ROI are then isolated into single tubes, strips, or 96-well plates.
Membrane Slides and Rings
Sticky Slides (PET)
- Membrane slides with PET membrane (1.4 μm)
- Enhanced stickiness for easier sample mounting
- Compatible with all common tissue staining techniques
- Fully compatible with standard autoclaving procedures
Sticky Slides (PET) - RNAse free
- Membrane slides with PET membrane (1.4 μm)
- RNAse-free, nucleic acid-free
- Enhanced stickiness for easier sample mounting
- Compatible with all common tissue staining techniques
- Fully compatible with standard autoclaving procedures
Sticky Slides (PPS)
- Membrane slide with PPS membrane (1.2 μm)
- Low autofluorescence
- Enhanced stickiness for easier sample mounting
- Compatible with all common tissue staining techniques
- Fully compatible with standard autoclaving procedures
Support Slide
- Supports the transfer process from a cryo section to a Membrane Slide/Sticky Slide
- Give rigidity to the membrane during sample preparation
18-well Membrane Slide
- PEN membrane, 2 μm
- Living cell isolation without removing culture media
Membrane Rings
- Offered in PEN or PET membrane
- Living cell isolation without removing culture media
- For the recultivation of cells
Isolation Dish
- Living cell isolation without removing culture media
- For the recultivation of cells
96-Well Plate & Tubes
96-well Isolation Plate
- For high-throughput isolation
- Silicone-bottom 96-well plate
- Designed for MMI CellCut HT
Isolation Caps (diffusor caps)
- Tubes in 0.2 ml, 0.5 ml, and 1.5 ml sizes
- Optimised for stained samples: highlights cores, minimises contrast of the cell wall
- Protein low bind version available
Isolation Caps (transparent caps)
- Tubes in 0.2 ml, 0.5 ml, and 1.5 ml sizes
- Optimised for fluorescent samples: makes cell walls and tissue structures clearly visible
- Protein low bind version available
CapStrips
- 8-well Tube Strips, 0.2 ml
- Available with transparent or diffuser caps
Consumables for Cell Picking
For gentle isolation of single cells in suspension using the CellEctor, various capillaries with different diameters, as well as different slides, well plates and nanowell slides are available.
Capillaries
Bent Capillaries
- Available in the following diameters: 20, 30, 40, 80, 120 and 160 μm
- Borosilicate microcapillaries
- Capillaries are bent to allow single cells to be isolated directly from above at a 90° angle
Slides, Plates & Tubes
CellEctor μ-Sides
- 8-well, 18-well or 96-well slides
- Enhance liquid handling efficiency on the MMI CellEctor
8-well Tube Strips
- 8-well Tube Strips, 0.2 ml
- For the collection of cells in up to 8 different tubes
SIEVEWELL Nanowells
- Generate high-density cell arrays
- Capture single-cells at a high rate
- 90,000 or 370,000 nanowells
- 20 or 50 μm nanowell size